UPS Uninterruptible Power Supply 1000va 2000va 3000va Power Factor 0.8 0.6 by China UPS Manufacturer

• Phase: Single Phase
• Type: Line Interactive
• Protection: Overvoltage
• Application: Industry
• Classification: Lighting/Power
• Standby Time: Standard Machine
• Model NO.: Power Bank 1-3kva
• Standby UPS: Sine Wave Output UPS
• Output Capacity: Small Type
• Equipment Mode: Centralized Model
• Brand: Xensure
• Power Factor: 1.0/0.8/0.6
• Number of Outlets: Optional
• Telecommunication Ports: RS232+RJ45+USB
• Panel: LED LCD
• Transport Package: Carton
• Specification: 4.6 kg
• Trademark: OEM
• Origin: Shenzhen China
• HS Code: 8504402000

Product Description

Product Description

 

Typical application

Data centre, bank station, network , communication equipment, office, automatic equipment, monitor equipment, control system

 

Highly flexible and extendable

Battery can choose

1. Battery voltage can be choice depend on capacity , can satisfy different requirement.

2. Convenience to get more back up time and lower system invests

3. Convenience to save cost of battery

4. Intelligent battery monitors Charge current can be adjust

5. Standant charge current 4A

6. Support more discharge time and more capacity battery for 8A charger

Input topology design

7. Support three phase input or single phase input for three phase UPS

8. Super wide input voltage and frequency range suitable for bad power electirc environment

9. Digital control DSP technology and best power component make the system safe and reliable

 

Multifunction friendly design

Advanced parallel technology

1. Stable parallel control technology make sure current sharing to 1%

2. Select trip technology can avoid and isolation system fault then improved system availability

3. Flexible extension capacity and redundance management that can satisfy all kinds of requirements

4. Support maximum 3 units for parallel working

Flexible strategy

5. On line mode provides higher system availability

6. High efficiency mode provides more economic operation

7. Frequency conversion provides more stable output

 

Higher function

Output power factor up to 0.9

1. Output power factor is 0.9 that mean can take more load, if you take same load that can get higher reliability. Input power factors up to 0.99

2. Three phase input model support three phase PFC , input THDI<5%

3. Output voltage regulation 1%, frequency regulation 0.1%, parallel current sharing 1%.

The efficiency up to 94%

4. Efficiency up to 93.5%when take the 30%load

5. ECO mode efficiency up to 98%
 

Detailed Photos

Product Parameters

 

PHASE		Single phase with ground
CAPACITY		1000VA/800W	2000VA/1600W	3000VA/2400W		6000VA/4800W		10000VA/8000W
INPUT
Nominal Voltage		100/110/115/120/127VAC or 200/208/220/230/240VAC				208/220/230/240VAC
Input Voltage Range		55-145VAC  or  110-300VAC  at50%load 85-140VAC or 160-280VAC a t 100%load				110-300VAC±3%at   50%load   176-300VAC±3%a    t100%load
Frequency Range		40Hz-70Hz				46Hz~54Hz OR 56Hz~64 Hz
Power Factor		0.99@100%load
OUTPUT
Output Voltage		00/110/115/120/127VACor 200/208/220/230/240VAC				208/220/230/240VAC
Voltage Regulation		±1%				±1%
Frequency Range (Synchronized Range		47~53 Hz or 57~~63 Hz				46Hz~54Hzor 56Hz~64 Hz
Frequency Range(Batt.Mode)		50Hz±0.25Hzor 60Hz±0.3 Hz				50Hz±0.1Hzor 60Hz±0.1Hz
Current Crest Ratio		3:1
Harmonic Distortion		=3 %THD (Linear Load),≤5 %THD (Non-linear Load)
Transfer Time	AC Mode to Battery Mode	0ms
	Inverter to Bypass	4 ms(Typical )				0 ms
Waveform (Batt.Mode)		Pure Sinewave
EFFICIENCY
AC Mode		88%	89%	90%		929%		93%
Battery Mode		83%	87%	88%		90%		91%
BATTERY
Standard Model	Battery Type	12V/9AH	12V/9 AH	12V/7 AH
	Numbers	2	4	6
	Typical Recharge Time	4 hours recover to 90% capacity
	Charging Current	1.0A
	Charging Voltage	27.4VDC±1%	54.7VDC±1%	82.1VDC±1%
Long-run Model	Battery Type	Depending on the capacity of external batteries
	Numbers	3	6	8		16~20(Adjustable)
	Charging Current (max.	1.0A/2.0A/4.0A/6.0 A				1A/2A/4A/6A Adjustable
	Charging Voltage	41.0VDC ±1%	82.1VDC ±1%	109.4VDC ±1%		218.4VDC±1%(Baed on 16pic batteries)
NDICATORS
LCD Panel		UPS status,Load level,Battery level,Input/Output voltage,Discharge timer,and Fault conditions
ALARM
Battery Mode		Sounding every 4 seconds
Low Battery		Sounding every second
Over load		Sounding twice every second
Fault		Continuously sounding
PHYSICAL
Standard Model	Dimension,DxWxH(mm)	310x438x88[2U]	410x438x88[2U]	630x438x88[2U]
	Net Weight (kgs	12	19	293
Long-run Model	Dimension,DxWxH (mm)	310x438x88[2U]	410x438x 88[2U]			500x438x88[2U]		580x 438x133[3U]
	Net Weight (kgs	9	12	142		15		18
ENVIRONMENT
Humidity		20-90%RH @0-40ºC(non-condensing			0-95 %RH @0-40ºC(non-condensing)
Noise Level		Less than 50dB @1 Meter			Less than 55dB@1 Meter			Less than 58dB @1Meter
MANAGEMENT
Smart RS-232/USB		Supports Windows"2000/2003/XPMista/2008,Windows"7/8,Linux,Unix,and MAC
Optional SNMP		Power management from SNMP manager and web browser